7750 Series - Stainless Steel Tube Flowmeter
These 316L Stainless Steel meters feature flange connections, all welded construction (no elastomers),
and an end to end length of 250mm. A float and tapered tube design provides longer, more linear scales.
A 4-20mA transmitter option adds to its versatility.
Description
Overall Length
250 Millimeters
Metering Tube
316L Stainless Steel
Internal Components
316L Stainless Steel
Inlet/Outlet Fittings
150# or 300# Flange, Vertical
Elastomers
All Welded Construction, No O-rings
or Gaskets
Options
Alarm
Single or Dual, Inductive Slot Sensor
4-20 ma Transmitter
Certified Calibrations
Conform to ISA RP 16.6
Scales
Can be produced in any volumetric unit
 |
Liquid Compatible |
 |
Gas Compatible |
 |
Alarm Compatible |
Performance
Capacities
33 GPH to 16.5 GPM — Water
2.2 SCFM to 76 SCFM — Air
Scale
120 mm Direct reading, detachable
Accuracy
± 3% of Full Scale Flow
Turndown 10:1
Repeatability 1%
Max Temperature
400° F (204° C)
| Max Pressure | ||
| Stainless Steel Flange Class | ||
| Temp F | 150# | 300# |
| 200° | 225 psi | 600 psi |
| 300° | 200 psi | 540 psi |
| 400° | 180 psi | 515 psi |
Ambient Temperature
33° F to 125° F (1° C to 52° C)
Specifications
| Order Number |
Full Scale Flow GPM-Water |
Meter Size |
Dimension (Inches) | 150 # Flange F |
300 # Flange F |
||||
| A | B | C | D | E | |||||
| 706 | 33.0 GPH | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 708 | 1.1 GPM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 710 | 2.0 GPM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 712 | 4.0 GPM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 716 | 5.0 GPM | 1" | 5.82 | 4.90 | 3.25 | 9.84 | 3.95 | 4.25 | 4.90 |
| 718 | 10.0 GPM | 1" | 5.82 | 4.90 | 3.25 | 9.84 | 3.95 | 4.25 | 4.90 |
| 720 | 16.5 GPM | 1" | 5.82 | 4.90 | 3.25 | 9.84 | 3.95 | 4.25 | 4.90 |
| Order Number |
Full Scale Flow SCFM - Air |
Meter Size |
Dimension (Inches) | 150 # Flange F |
300 # Flange F |
||||
| A | B | C | D | E | |||||
| 705 | 2.2 SCFM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 707 | 4 SCFM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 709 | 8 SCFM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 711 | 16.5 SCFM | 1/2" | 5.82 | 4.90 | 2.91 | 9.84 | 3.83 | 3.50 | 3.75 |
| 715 | 20 SCFM | 1" | 5.82 | 4.90 | 3.25 | 9.84 | 3.95 | 4.25 | 4.90 |
| 717 | 42 SCFM | 1" | 5.82 | 4.90 | 3.25 | 9.84 | 3.95 | 4.25 | 4.90 |
Alarm Options:
Like inductive ring sensors, slot sensors are 2-wire, DC, low-current devices and are designed to be used with a remote intrinsic safety barrier/switch isolator. Single or dual slot sensors are available for the 7700 Series.
Power Supply: 5-25 VDC
(from Switch Isolator)
Max Current, Target Present: 1 mA
Max Current, Target Absent: 15 mA
Temperature Limits: -14°F to +212°F
Output: NAMUR
Repeatability: 0.01 mm
Switching Frequency: 2 kHz
Sensor Approvals*:
UL Listed: General Purpose
FM Approved: Intrinsically Safe*
CSA Certified: Intrinsically Safe*
Cenelec: Intrinsically Safe*
Power Supply:12 to 33 Vdc
Maximum Current Consump.: 40 mA
Temperature Limits: -13° F to 158° F (-25 to 70° C)
Output: 4 to 20 mAdc
Accuracy: <0.5%
Linearity: +0.4%
Influence from bearing play: ±0.1%
Temperature influence (amb): 0.03% per °C
Power supply influence: ±0.1%
Load resistance influence: ±0.1% at R max.
*Specifications shown here are for the transmitter only and should not be confused with the actual performance capabilities of the flowmeter.
Ordering:
Use the following guide to determine the specific product number you require.
7
7
5 |
2 |
0 |
|||
| Meter Series | Connection Type | Float Material | O-Ring Material | Optional Alarm/Transmitter | Order Number |
| 150# R.F. Flanged - 2 300# R.F. Flanged - 3 |
316L SS - 2 | No O-ring - 0 | None - 0 With Transmitter - T One Alarm (Inductive Slot Sensor) - A Two Alarms (Inductive Slot Sensors) - D |
See Specifications Table |
Example: 775 - 2 - 2 - 0 - 0 - 716
The Company Mission
“To produce the finest group of rotameters ever sold”
We are committed to:
Clearly understanding and fulfilling our Customers’ needs and expectations of timely delivery, product performance and value.
Fostering productive, long-term relationships with Suppliers by aligning their goals with the needs of our Customers.
Methodically improving our production systems to create true quality and productivity enhancements that directly benefit our Customers.
A culture that values continuous improvement in our products, services, and personal relationships.
Ph: (714) 891-0008 • sales@kinginstrumentco.com • 12700 Pala Drive Garden Grove, CA 92841 | Quality Made In The U.S.A.